Sony KD-34XBR970 Satellite Receiver, Setup

Satellite Receiver To connect a satellite receiver

Using

S VIDEO jacks? See page 7.

1Connect the satellite antenna cable to the satellite receiver’s satellite input jack.

2Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.

3Connect a CATV cable from your cable or antenna to the TV’s CABLE jack.

4Run Auto Program, as described in “Setting Up the Channel List” on page 20.

TV

	CATV cable/antenna
DIGITAL
AUDIO
OUT	Satellite receiver
DOLBY DIGITAL
PCM/		Satellite antenna
		cable

			Cables are often
			color-coded to connectors.
			Connect red to red,
	A/V cable		white to white, etc.
Notes on Using This Connection
To Do This ...		Do This ...
Watch the satellite receiver		Press TV/VIDEO repeatedly to select the satellite receiver input
		(VIDEO 1 in the illustration).
Set up the TV remote control to operate the		If you have a non-Sony satellite receiver, you must program
satellite receiver		the remote control. See “Programming the Remote Control”
		on pages 24-25.
Activate the TV remote control to operate		Press SAT/CABLE FUNCTION.
the satellite receiver
Control satellite receiver functions with the		See “Operating a Satellite Receiver” on page 26.
TV remote control
Label video inputs to easily identify		See the instructions for setting up Video Labels on page 45.
equipment connected to the TV

Setup

SETUP

SETUP

SETUP

SETUP

11