DVD Player with Component Video Connectors

For best results, use this connection if your DVD player has component video (YPBPR) jacks.

To connect a DVD player with component video connectors

1 Use three separate component video cables to connect the DVD player’s YPBPR jacks to the YPBPR jacks (VIDEO 4) on the TV.

 

✍ The YPBPR jacks on your DVD player are sometimes labeled Y, CB

 

and CR, or Y, B-Y and R-Y. If so, connect the cables to like colors.

Setup

2 Use an audio cable to connect the DVD player’s audio output

jacks to the TV’s VIDEO 4 audio input jacks.

 

 

Component video cables

 

TV

SETUP

DVD player

 

Cables are often color-coded to connectors. Connect red to red, white to white, etc.

Audio cable

Notes on Using This Connection

To Do This ...

Do This ...

Watch the DVD player

Press TV/VIDEO repeatedly to select the DVD input (VIDEO 4 in the

 

illustration).

 

 

 

Set up the TV remote control

If you have a non-Sony DVD player, you must program the remote control.

to operate the DVD player

See “Programming the Remote Control” on pages 24-25.

 

 

 

Activate the TV remote

Press VCR/DVD FUNCTION.

control to operate the DVD

 

 

player

 

 

 

 

 

Control DVD functions with

See “Operating a DVD Player” on page 27.

the TV remote control

 

 

 

 

 

Label video inputs to easily

See the instructions for setting up Video Labels on page 45.

identify equipment connected

 

 

to the TV

 

 

 

 

 

 

 

 

✍ You cannot record the signal from any equipment connected into the YPBPR

 

 

jacks.

 

 

 

 

14