Connecting Additional Equipment
Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R)
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player to AUDIO/VIDEO IN on your TV.
Rear of TV
ATSC
Rear of DVD Player
Optional connection | Audio R (red) |
| Audio L (white) |
| Video (yellow) |
Optional connection
❏For better picture quality, use S VIDEO (located on the rear panel) instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
Connecting a DVD Player using Component Video (YPBPR R L)
If your DVD player is equipped with component video outputs (YPBPR), you can improve the picture quality by using component video cables (480i only).
Rear of TV
ATSC
Rear of DVD Player
PR (red) |
|
PB (blue) | Audio L (white) |
Y (green) | Audio R (red) |
21
1Make sure your DVD player is set up (see page 35). Using component video cables (not supplied), connect YPBPR OUT on your DVD player to YPBPR IN on your TV.
2Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
✍The YPBPR outputs on your DVD player are sometimes labeled Y, CB, and CR or Y,
Connections
7