Getting Started

Installing the TV

Preventing the TV

Attaching the Support Belt

from Toppling Over

 

1Screw the support belt (supplied) to the TV stand with a wood screw (supplied).

2Attach the support belt to the stand with the securing screw (supplied) using a coin, etc.

3Adjust the length by pulling the support belt towards you while holding the TV stand.

Be sure to take measures to prevent the TV from toppling over and causing injury.

The supplied wood screw may not be used depending on the type of TV stand. In this case, or when the securing strength is not enough, prepare commercial screws to fit to the TV stand. Use commercial screws of 3 to 4 mm (1/8 to 3/16 inches) diameter. Consult your dealer about the types of screw.

When Installing on a Wall

Be sure to use the specified Wall-Mount Bracket (see page 3) when installing the TV on a wall. Refer to the Instruction Guide supplied with the Wall-Mount Bracket (sold separately).

(See page 43 or 44 for Table-Top Stand removal.)

16