Other Information

Preparation for Wall Mounting the KDL-40S2010 and KDL-46S2010

This TV can be installed on a wall by using a wall-mount bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV.

Do not remove the Table-Top Stand for any reason other than to wall- mount the TV.

Sony Wall-Mount

Bracket ModelsSU-WL51 andSU-PW2

(KDL-40S2010/

KDL-46S2010)

Follow the simple steps below to remove the Table-Top Stand:

1Disconnect all the cables from the TV.

2Start removing the screws from the ones on top. (See illustration below) Do not remove any other screws from the TV.

3When screws are removed, lift the TV out. Make sure that you carry out this task with two people. Do not attempt to lift the TV by your self.

For bracket installation, refer to the instruction guide provided by the Wall- Mount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight. For product protection and safety reasons,

Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors.

Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children.

44