Introducing MENU Function
OptionDescription
2If you selected Set in step 1, press V/v/B/b to set the day(s), hour, minute, AM/PM, duration, channel number (VHF/UHF, CATV or Digital), and volume.
When Digital is selected, the last digital channel you viewed will automatically show when the TV is turned on.
3Press MENU to exit Settings.
To return to the Timer Settings after programming the Timer or Current Time, press B.
Timer will be set to Off when:
- Auto Program for analog channels is executed.
- the AC power cord is disconnected and then reconnected to turn the TV on and the Current Time is displayed as
| Current Time | Select to set the current time (day, hour, minute, and AM/PM). | |
|
| 1 Press | to select Current Time. |
|
| 2 Press V/v/B/b to set the current time (day, hour, minute, and | |
|
| AM/PM). |
|
|
| 3 Press MENU to exit Settings. | |
|
| ||
Power Saving | Select to reduce the power consumption by adjusting the backlight brightness. This also | ||
| enhances the black level. Select from Off, Low, High and Picture Off. | ||
|
| ||
Light Sensor | Select On to enable the automatic picture (screen) brightness control. The light sensor | ||
| measures the room brightness which allows the TV to automatically adjust the backlight | ||
| brightness based on the picture settings and the ambient room light conditions. | ||
|
| ||
| Be sure not to put anything around the sensor, as its function may be affected. | ||
| See page 21 on the sensor. | ||
| In low light the range of the backlight control is reduced when Light Sensor is | ||
| set to On. |
|
|
Quiet Power On | Select to have the TV volume start at the minimum volume and gradually change to the set | ||
| level when you turn it on. |
| |
|
|
| |
Speaker | On | Select to turn on the TV speakers. | |
|
|
| |
| Off | Select to turn off the TV speakers and listen to the TV’s sound only | |
|
| through your external audio receiver and speakers. | |
|
|
| |
Audio Out | Variable | When Speaker is set to Off, the audio output from your audio system | |
Easy control of volume |
| can be controlled by the TV’s remote control. | |
adjustments |
|
| |
Fixed | When Speaker is set to Off, the audio output of the TV is fixed. Use | ||
|
| your audio receiver’s remote control to adjust the volume (and other | |
|
| audio settings) through your audio system. | |
|
|
| |
Cable | On | Select if you are receiving cable channels via Cable TV provider. | |
|
|
| |
| Off | Select if you are using an antenna. | |
|
| ||
| You should run Auto Program after changing the Cable setting. | ||
Information | Select to display the equipment information of your TV. | ||
|
|
|
|
Function MENU Introducing
(Continued)
31