Other Information

Problem

Possible Remedies

Audio noise.❑ Make sure that the antenna is connected using the supplied 75-ohm coaxial

 

 

cable.

 

❑

Keep the antenna cable away from other connecting cords.

 

❑

To avoid TV interference, make sure to use an undamaged antenna cable.

Wide Mode changes automatically. ❑ The current Wide Mode setting is automatically replaced with the 4:3 Default setting when you change the channel or video input, if 4:3 Default in the Screen settings is set to other than Off. If you want to lock in the Wide Mode selected with the WIDE button, set 4:3 Default to Off in the Screen settings (page 27).

❑Check the Auto Wide option in the Screen settings (page 27).
“Black box” on screen.

❑ You have selected a text option in the Setup/Digital Setup setting and no text is

 

available. (See pages 29 and 37 to reset Setup selections.) To turn off this feature,

 

set the Caption Vision option to Off. If you were trying to select closed

 

captioning, select CC1 instead of Text1-4.
Black bands appear at the top and bottom of the screen.

❑Some wide-screen programs are filmed in aspect ratios that are greater than 16:9 (this is especially common with theatrical releases). Your TV will show these programs with black bands at the top and bottom of the screen. For more details, check the documentation that came with your DVD (or contact your program provider).

Certain programs on DVD or other❑ The compression used by certain digital broadcasts and DVDs may cause your
digital sources display a loss of

TV’s screen to display less detail than usual, or cause artifacts (small blocks or

detail, especially during fast-motion

dots, pixelations) to appear on your screen. This is due to your TV’s large screen

or dark scenes.

and ability to show very fine detail, and is normal for certain digitally recorded

 

programs.

 

 

Remote control does not operate.❑ Check the polarity of the batteries or replace the batteries.

 

❑ Point the remote control at the remote control sensor of the TV.

 

❑ Florescent lamps can interfere with your remote control operation; try turning

 

off the florescent lamps.

 

❑ Keep the remote control sensor area clear from obstacles.

 

 

Some digital cable channels are not

❑ Certain cable companies have limitations on the broadcast of digital cable
being displayed.channels. Check with your cable company for more information.

 

❑ The digital cable channel may be set to Hidden in the Show/Hide Channels

 

setting (see page 36).

 

 

Lost password.

❑ Select the Parental Lock settings on the settings screen, then enter the following

 

master password: 4357. The master password clears your previous password and

 

allows you to enter a new password (page 30).
How to reset the TV to factory settings.

❑Turn on the TV. While holding down the V button on the remote control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the V button.

WARNING: The Reset will clear all of your customized settings includingParental Lock setting.

40