Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR/ DVD recorder

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / to display a list of connected equipment. Press F/f to select the desired input source, then press .

The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing .

If you have set an input source to "Skip" in the "AV Preset" menu (page 26), that input source does not appear in the list.

z

To return to normal TV mode, press DIGITAL or

ANALOG.
Symbol on theDescription
screen

 

 

 

AV1

To see the equipment connected to

 

A.

 

 

AV2

To see the equipment connected to

 

B.

 

~

 

SmartLink is a direct link between

 

the TV and a VCR/DVD recorder.

 

 

AV3

To see the equipment connected to

 

L.

 

 

HDMI 1

HDMI IN 1*.

 

To see the equipment connected to

 

D.

 

 

HDMI 2

HDMI IN 2*.

 

To see the equipment connected to

 

E.

 

If the equipment has a DVI socket,

 

connect the DVI socket to the

 

HDMI IN socket through a DVI-

 

HDMI adaptor interface (not

 

supplied), and connect the

 

equipment’s audio out socket to the

 

audio in HDMI IN socket.

 

 

Symbol on the

Description

screen

 

 

 

HDMI 3

HDMI IN 3*.

To see the equipment connected to

K.

*~

Be sure to use only an HDMI cable that bears the HDMI logo.

When “Control for HDMI” compatible equipment is connected, communication with the connected equipment is supported. Refer to page 19 to set up this communication.

When connecting an audio system with HDMI socket, be sure to also connect to the HiFi socket.

Component

To see the equipment connected to

 

C.

 

 

PC

To see the equipment connected to

 

H.

 

z

 

It is recommended to use a PC

 

cable with ferrites, such as the

 

"Connector, D-sub 15" (ref. 1-

 

793-504-11, available in Sony

 

Service Centre) or equivalent.

 

 

 

 

To connect Do this

Headphones M Connect to the i socket to listen to sound from the TV on headphones.

Conditional

To use Pay Per View services.

Access Module

For details, refer to the instruction

(CAM) I

manual supplied with your CAM. To

 

use the CAM, remove the rubber

 

cover from the CAM slot. Switch off

 

the TV when inserting your CAM

 

into the CAM slot. When you do not

 

use the CAM, we recommend that

 

you replace the cover on the CAM

 

slot.

 

~

 

 

CAM is not supported in all countries.

 

Please check with your authorized

 

dealer.

 

 

 

 

Hi-Fi audio

Connect to the audio output sockets

equipment G

 

 

to listen to the sound from the

 

 

 

TV on Hi-Fi audio equipment.

 

 

 

 

DIGITAL

Use an optical audio cable.

AUDIO OUT

 

 

 

(OPTICAL) F

 

 

 

 

 

 

 

USB J

Use USB memory to display photos.

Additional operations

To

Do this

 

 

Return to normal TV

Press DIGITAL or ANALOG.

mode

 

 

 

18 GB