Audio Filter

Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”.

~

You cannot receive stereo or dual sound when “Low” or “High” is selected.

LNA

Improves the picture quality for individual channels in the case of very weak broadcast signals (noisy picture).

If you cannot see any improvement in the picture quality even if you set to “On”, set this option to “Off” (factory setting).

Skip

Skips unused analogue channels when you press PROG +/– to select channels. (You can still select a skipped channel using the number buttons.)

Decoder

Shows and records the scrambled channel selected when using a decoder

connected directly to scart connector

/

AV1, or to scart connector

/

/

AV2 via a VCR/DVD recorder.

 

 

~

Depending on the country/region selected for “Country” (page 7), this option may not be available.

Confirm

Saves changes made to the “Manual Programme Preset” settings.

Digital Set-up

Digital Tuning

Digital Auto Tuning

 

Tunes in the available digital channels.

 

This option allows you to retune the TV after moving house, or to search for new

 

channels that have been launched by broadcasters). For details, see “Auto-tunning

 

the TV” (page 7).

Programme Sorting

Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV.

1

Press F/f to select the channel you want to remove or move to a new

 

position.

 

Press the number buttons to enter the known three-digit programme number of the

 

broadcast you want.

2

Remove or change the order of the digital channels as follows:

 

To remove the digital channel

 

Press

. After a confirmation message appears, press G to select “Yes”, then press

 

.

 

 

To change the order of the digital channels

 

Press g, then press F/f to select the new position for the channel and press G.

3

Press

RETURN.

 

 

 

Functions MENU Using

Continued

29 GB