Preparation for Wall-Mounting

This TV can be installed on a wall by using a Wall- Mount Bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV.

~

•Do not remove the Table-Top Stand for any reason other than to wall-mount the TV.

Follow the simple steps below to remove the Table-Top Stand:

1Disconnect all the cables from the TV.

2Gently lay the TV, face down, onto a level and stable surface covered with a thick and soft cloth. Make sure the Table-Top Stand is hanging over the edge.

3Remove the screws as shown in the illustration for your model and pull the Table- Top Stand out.

4Do not remove any other screws from the TV.

Models: KDL-26S3000/KDL-32S3000/ KDL-32SL130

Remove 3 designated screws only.

Level surface Table-Topcovered with a

~

•Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children.

•For bracket installation, refer to the instruction guide provided by the Wall-Mount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

•For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall- mounting of your TV should be performed by a Sony dealer or licensed contractor.

Models: KDL-40S3000/KDL-46S3000/ KDL-40SL130

Remove 4 designated screws only.

Level surface

soft cloth

Stand

Table-Top

covered with a

soft cloth

Stand

12