Channel Settings

Cable

On

For receiving cable channels via cable TV provider.

 

Off

For using an antenna.

~

• You should run Auto Program after changing the Cable setting.

Auto Program

Automatically sets up the channel list on the TV for all receivable channels. Channel

 

scanning will be based on the Cable On/Off setting.

 

1

Select Auto Program.

 

2

Select OK to start Auto Program. When Auto Program is completed, the screen

 

3

will display the number of channels found.

 

Press RETURN to exit the Auto Program.

~

•Running Auto Program will clear Favorites list.

•If you run Auto Program again, previously scanned channels will be overwritten with the newly scanned channels.

Add Digital Channels Select to add digital channels. Be sure to have the Cable option selected appropriately for the signal source. (Useful for antenna installations.)

Show/Hide Channels Allows you to show or hide channels when you surf with the CH +/– button or in the TV channel list on the XMB™.

1Press V/v to scroll through the channels until you highlight the channel to show or hide.

2Press to select Shown or Hidden.

To show or hide more channels, repeat steps 1-2.

~

•Hidden channels can be accessed by entering the channel number with 0-9buttons on the remote control.

Edit Channel Labels Assigns labels (such as station call letters) to channel numbers.

1Press V/v to scroll through the channel numbers. Then press to select the channel number to assign a label.

2Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to the next character. Repeat to add up to 7 characters to the label. Press to set it. To assign labels to more channels, repeat steps 1-2.

Features TV Using

35