PC
Use the TV as a monitor for your PC by connecting a HD15 to HD15 cable as shown below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.)
Rear of TV
VIDEO IN |
| COMPONENT IN PC IN | IN | DIGITAL | |
1 | 3 | 1 | 2 | 1 | AUDIO |
|
|
|
|
| OUT |
(OPTICAL)
YRGB
|
|
|
| 3 |
| PB |
|
|
|
VIDEO |
|
|
| 4 |
| PR |
|
| AUDIO OUT |
L | L |
|
| L |
(MONO) |
|
| ||
AUDIO | AUDIO | AUDIO | R AUDIO L | AUDIO |
R | R |
|
| R |
| (1080p/1080i/720p/480p/480i) |
|
| (VAR/FIX) |
Audio cable (stereo mini plugs)
~
•Connect the PC IN jack to the PC using an HD15- HD15 cable with ferrite core (analog RGB) and audio cable (see page 11).
•If the PC is connected to the TV and no signal has been input from the PC for more than 30 seconds, the TV enters the standby mode automatically (see page 42).
After connecting the PC to the TV, set the output signal from the PC according to the supported resolutions and timings indicated below.
Supported resolutions |
|
| Horizontal | Vertical | Standard | ||
Signal | Horizontal | × | Vertical | ||||
frequency (kHz) | frequency (Hz) |
| |||||
| (Pixel) |
| (Line) |
| |||
|
|
|
|
| |||
VGA | 640 | × | 480 | 31.5 | 60 | VGA | |
|
|
|
|
|
|
| |
| 640 | × | 480 | 37.5 | 75 | VESA | |
|
|
|
|
|
|
| |
| 720 | × | 400 | 31.5 | 70 | ||
|
|
|
|
|
|
| |
SVGA | 800 | × | 600 | 37.9 | 60 | VESA Guidelines | |
|
|
|
|
|
|
| |
| 800 | × | 600 | 46.9 | 75 | VESA | |
|
|
|
|
|
|
| |
XGA | 1,024 | × | 768 | 48.4 | 60 | VESA Guidelines | |
|
|
|
|
|
|
| |
| 1,024 | × | 768 | 56.5 | 70 | VESA | |
|
|
|
|
|
|
| |
| 1,024 | × | 768 | 60.0 | 75 | VESA | |
|
|
|
|
|
|
| |
WXGA | 1,280 | × | 768 | 47.4 | 60 | VESA | |
|
|
|
|
|
|
| |
| 1,280 | × | 768 | 47.8 | 60 | VESA | |
|
|
|
|
|
|
| |
| 1,280 | × | 768 | 60.3 | 75 |
| |
|
|
|
|
|
|
| |
| 1,360 | × | 768 | 47.7 | 60 | VESA | |
|
|
|
|
|
|
| |
SXGA | 1,280 | × | 1,024 | 64.0 | 60 | VESA | |
|
|
|
|
|
|
| |
HDTV | 1,920 | × | 1,080 | 67.5 | 60 | ||
|
|
|
|
|
|
| |
~
•This TV’s PC input does not support Sync on Green or Composite Sync.
•This TV’s PC VGA input does not support interlaced signals.
•Your PC must support one of the above PC input signals to display on the television.
•For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency. In plug and play, signals with a
60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.)
*The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. This affects Picture settings, Wide Mode settings, and PIP function. To view PC content set Picture Mode to Custom, Wide Mode to Full, and Display Area to Full Pixel.
14