4GB
Setting Up

Attaching the Table-Top

Stand (except KDL-

60LX903)

1Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2Place the TV set on the Table-Top
Stand.
3Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
~
If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4After all the screws have been
tightened, attach the supplied stand rear
cover to the Table-Top Stand.

Adjusting the viewing angle of

the TV (except KDL-60LX903)

This TV can be adjusted within the angles
shown below.
~
To return to 0°, reverse the above procedure.
14
23
Remove screw as
shown.
Install screw into
the top screw hole
of the Table-Top
Stand.
Slide in.Lift up and tilt.