7GB
Setting Up

Performing the initial set-up

1Connect the TV to your AC power
outlet (mains socket).
2Check the ENERGY SAVING
SWITCH setting is on (z).
3Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1Press F/f to select the channel you want
to move to a new position, then press .
2Press F/f to select the new position for
the channel, then press .
~
You can also tune channels manually.

Detaching the Table-Top

Stand from the TV

~
Remove the stand rear cover and bottom cover
prior to detaching the Table-Top Stand.
Remove the screws guided by the arrow marks
of the TV.
Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
Be sure the TV is on the vertical position before
switching on. TV set must not powered on with
LCD panel face down to avoid uneven picture
uniformity.
4