34 GB
Set-up
USB Auto Start Automatically enters the thumbnail view of the last played Photo/Music/Video when
the TV is turned on and a USB device is connected to the USB port then turned on.
Sleep Timer Sets a period of time after which the TV automatically switches itself into standby
mode.
When the “Sleep Timer” is activated, the (Sleep Timer) indicator on the TV front
panel lights up in orange.
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
• A notification message appears on the screen one minute before the TV switches to standby
mode.
Auto Start-up Starts the initial set-up to select the language, country/region and location, and tune
in all available digital and analogue channels. Usua lly, you do not need to do this
operation because the language and country/region wi ll have been selected and
channels already tuned when the TV was first installed. However, this option allows
you to repeat the process (e.g., to retune the TV after moving house).
Language Selects the language in which the menus are displayed.
Start-up Sound Select “On” to play sound when the TV is turned on. Select “Off” to disable it.
AV Set-up Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected.
1Press F/f to select the desired input source, then press .
2Press F/f to select the desired option below, then press .
•AV1 (or AV2/HDMI1/HDMI2/Component/PC), CABLE, SAT, VCR, DVD/BD,
HOME THEATRE, GAME, CAM, DIGITAL CAMERA, PC: Uses one of the
preset labels to assign a name to con nected equipment.
• “Edit”: Creates your own label.
1Press F/f to select the desired letter or number (“_” for a blank
space), then press g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
2Repeat the procedure in step 1 until the name is completed, then
press .
HDMI Set-up Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI sockets of the TV. Note that
communication settings must also be made on the connected equipment.
“Control for HDMI”: Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for HDMI.
“Auto Devices Off”: When this is set to “On”, the connected equipment that is
compatible with control for HDMI turns off when you switch the TV to standby
mode using the remote.
“Auto TV On”: When this is set to “On”, the TV turns on when you turn on the
connected equipment that is compatible with control for HDMI.
“HDMI Device List”: Displays a list of connected equipment that is compatible
with control for HDMI.
“Device Control Keys”: If it is set to “Tuning Keys”, you can select a channel tuned
by connected equipment and if it is set to “Menu Keys” you can navigate through the
menus of the connected equipment using the remote.