Timer
Sets the timer to turn on/off the TV.
•Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby mode.
When the Sleep Timer is activated, the 
(Timer) indicator on the TV (front) lights up in orange.
Tips
•If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
•“Sleep timer will end soon. Power will be turned off” appears on the screen one minute before the TV switches to standby mode.
•Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal.
• Timer
Sets the timer to turn on/off the TV. “Timer Mode”: Selects the desired period. “On Time”: Sets the time to turn on the TV. “Off Time”: Sets the time to turn off the TV.
Set-up menu
| Set Up |
|
|
|
| System Information |
|
| |
| Auto Start Up |
|
|
|
| Language |
|
| English |
| Country |
|
| - |
| Auto Tuning |
|
|
|
| Programme Sorting |
|
| |
| AV Preset |
|
|
|
| Sound Offset |
|
|
|
| Manual Programme Preset |
|
| |
| Digital Set Up |
|
|
|
| Back: | Select: | Enter: | Exit: MENU |
|
|
|
|
|
You can select the options listed below on the
System Information Auto Start-up
Language
Country
Displays the current software version and the signal level.
Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels.
Selects the language in which the menus are displayed.
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
Auto Tuning | Tunes in all the available analogue channels. | |
Programme Sorting | Changes the order in which the analogue channels are stored on the TV. | |
| 1 | Press F/f to select the channel you want to move to a new position, |
|
| then press g. |
| 2 | Press F/f to select the new position for your channel, then press . |
AV Preset | Assigns a name to any equipment connected to the side and rear sockets. | |
| 1 | Press F/f to select the desired input source, then press . |
| 2 | Press F/f to select the desired option below, then press . |
|
| • “AV1 (or AV2/ AV3/ AV4/ PC/ HDMI 1/HDMI 2), VIDEO, DVD, CABLE, GAME, |
CAM, SAT”: Uses one of the preset labels to assign a name to connected equipment.
• “Edit”: Creates your own label.
• “Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source.