NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with 
or 
) must be used.
When an alternative type of plug is used it should be fitted with a 13 AMP FUSE, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
FUSE
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and replace the fuse.
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
Notice for Digital TV function
• Any functions related to Digital TV ( ) will only work in countries or areas where
•Although this TV set follows
•Some Digital TV functions may not be available in some countries.
Trademark information
•
is a registered trademark of the DVB Project
•Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
•TruSurround XT, SRS and (z) symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
• |
|
| HDMI, the HDMI logo and |
|
| ||
|
|
| |
| Interface are trademarks or registered trademarks of | ||
| HDMI Licensing, LLC. | ||
•The illustrations used in this manual are of the KDL- 32S2000 unless otherwise state.