Picture menu

You can select the options listed below on the Picture menu. To select options in “Settings”, see “Navigating through menus” (page 20).

Target Inputs

Selects whether to apply settings made in the Picture menu to all inputs, or only to

 

the input currently being watched.

 

“All”: Applies settings to all inputs.

 

“Viewing Only”: Applies settings only to the current input.

 

 

Picture Mode

Selects the picture mode.

 

“Vivid”: For enhanced picture contrast and sharpness.

 

“Standard”: For standard picture. Recommended for home entertainment.

 

“Custom”: Allows you to store your preferred settings.

 

 

Reset

Resets all picture settings except “Picture Mode” to the factory settings.

 

 

Backlight

Adjusts the brightness of the backlight.

 

 

Contrast

Increases or decreases picture contrast.

 

 

Brightness

Brightens or darkens the picture.

 

 

Colour

Increases or decreases colour intensity.

 

 

Hue

Increases or decreases the green tones.

 

Tip

 

“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

 

 

Colour Temperature

Adjusts the whiteness of the picture.

 

“Cool”: Gives the white colours a blue tint.

 

“Neutral”: Gives the white colours a neutral tint.

 

“Warm1”/“Warm2”: Gives the white colours a red tint. “Warm2” gives a redder tint

 

than “Warm1”.

 

Tip

 

“Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”.

 

 

Functions MENU Using

Continued

21 GB