Sound
Problem | Cause/Remedy | |
|
| |
No sound, but good picture | • Press 2 +/– or % (Mute). | |
| • | Check that “Speaker” is set to “On” in the |
|
|
|
Noisy sound | • | See the “Picture noise” causes/remedies on page 38. |
|
|
|
Channels
Problem | Cause/Remedy |
|
|
The desired channel cannot be | • Switch between digital and analogue mode and select the desired digital/ |
selected | analogue channel. |
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service.
•Channel is used only for data (no picture or sound).
•Contact the broadcaster for transmission details.
Digital channel is not displayed • Contact a local installer to find out if digital transmissions are provided in your area.
• Upgrade to a higher gain aerial.
General
Problem | Cause/Remedy |
|
|
The TV turns off automatically | • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of |
(the TV enters standby mode) | “On Timer” (page 25). |
| • If no signal is received and no operation is performed in the TV mode for |
| 10 minutes, the TV automatically switches to standby mode. |
|
|
The TV turns on automatically | • Check if the “On Timer” is activated (page 26). |
|
|
Some input sources cannot be | • Select “AV Preset” in the |
selected | source (page 25). |
|
|
The remote does not function | • Replace the batteries. |
|
|
Information Additional