2 Press F/f to select “PAP”, then press .

The picture from connected equipment is displayed on the left and the TV programme is displayed on the right.

3 Press number buttons or PROG +/- to select the TV channel.

To return to single picture mode

Press or RETURN.

z

The picture framed in green is audible. You can switch the audible picture by pressing G/g.

To view two pictures simultaneously

– PIP (Picture in Picture)

You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen.

~

•You cannot display resolutions higher than WXGA (1280 × 768 pixels).

•“Power Management” is not available in PIP mode (page 30).

1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PIP”, then press .

The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner.

You can use F/f/G/g to move the TV programme screen position.

3 Press number buttons or PROG +/- to select the TV channel.

To return to single picture mode

Press RETURN.

z

You can switch the audible picture by selecting “Audio Swap” from the Tools menu.

Using HDMI control

The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI.

You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables.

Be sure to correctly connect and set the compatible equipment to use the HDMI control function.

To connect the HDMI control compatible equipment

Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. For details, see page 16.

To make the HDMI control settings

HDMI control must be set on both the TV side and the connected equipment side. See “HDMI Set-up”on page 28 for the TV side settings. See the operating instructions of the connected equipment for setting details.

HDMI control functions

•Turns the connected equipment off interlocked with the TV.

•Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play.

•If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system.

•Adjusts the volume and mutes the sound of a connected audio system.

Equipment Optional Using

19 GB