AV | AV Preset |
Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip input signals from connected equipment that you do not want displayed on the screen.
1Press F/f to select the desired input source, then press 
.
2Press F/f to select the desired option below, then press 
.
Equipment labels: Uses one of the preset labels to assign a name to connected equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 31).
“Skip”: Skips an unnecessary input source.
Auto S VideoSelects the input signal from S video sockets
6 when 
/
6 sockets are both connected.
Sets a signal to be output through the socket labelled 
/
2 on the rear of the TV. If you connect a VCR or other recording equipment to the 
/
2 socket, you can then record from the equipment connected to other sockets of the TV.
“TV”: Outputs a broadcast.
“AV1”: Outputs signals from equipment connected to the 
/
1 socket.
“AV6”: Outputs signals from equipment connected to the 
/
6 socket.
“Auto”: Outputs whatever is being viewed on the screen (except signals from the 
/
3, HDMI IN 4, HDMI IN 5, HDMI IN 7 and PC 
/
sockets).
Turns on/off the TV’s internal speakers.
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers.
“Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with an HDMI control compatible equipment, you can turn the connected equipment on interlocked with the TV. This setting must be made after connecting the equipment.
Audio Out“Variable”: The audio output from your audio system can be controlled by the TV’s remote.
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system.
~
“Audio Out” is not available for audio system connected to the TV using the HDMI sockets.
Colour SystemSelects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or “PAL60”) according to the input signal from the input source.
Functions MENU Using
Continued