Turn on the connected equipment, then perform one of the following operation.
For equipment connected to the scart sockets using a
Start playback on the connected equipment.
The picture from the connected equipment appears on the screen.
For anIn analogue mode, press PROG
Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.)
When the input source is set to “Skip” in the “AV Preset” menu under the “AV
Additional operations
To | Do this |
|
|
Return to normal TV | Press DIGITAL or ANALOG. |
mode |
|
|
|
Access the Input signal | Press to access the Input |
index table (except TV | signal index table. To select an |
mode) | input source, press F/f, then |
| press . |
|
|
Change the volume of | Press 2 |
the connected HDMI |
|
control compatible |
|
audio system |
|
|
|
Mute the sound of the | Press %. |
connected HDMI | Press again to restore. |
control compatible |
|
audio system |
|
|
|
Using the Tools menu
Press TOOLS to display the following options when viewing pictures from connected equipment.
Options | Description |
|
|
Close | Closes the Tools menu. |
|
|
Picture Mode (except | |
PC input mode) |
|
|
|
Display Mode (in PC | |
input mode only) |
|
|
|
Sound Mode | |
|
|
Speaker | |
|
|
PAP (except PC input | |
mode) |
|
|
|
PIP (in PC input | |
mode only) |
|
|
|
Auto Adjustment (in | |
PC input mode only) |
|
|
|
Horizontal Shift (in | |
PC input mode only) |
|
|
|
Vertical Shift (in PC | |
input mode only) |
|
|
|
i Volume | Adjusts the volume of the |
| headphones. |
|
|
Sleep Timer (except | |
PC input mode) |
|
|
|
Power Saving | |
|
|
Auto Clock Set | Allows you to switch to digital |
| mode and obtain the time. |
|
|
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and TV programme) on the screen simultaneously.
Connect the optional equipment (page 18), and make sure that images from the equipment appear on the screen (page 20).
~
•This function is not available for a PC input source.
•You cannot change the size of the pictures.
•You cannot display analog TV video in the TV programme picture while displaying AV1, AV2 or AV6 video in the external input picture.
1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PAP”, then press .
The picture from connected equipment is displayed on the left and the TV programme is displayed on the right.