9 Press MENU to exit.
The TV has now tuned in all the available channels.
~
When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 6), the time must be set after performing step 9.
To tune the TV for digital cable connection
1 Press F/f to select “Scan Type”, then press 
.
2 Press F/f to select “Quick Scan” or “Full Scan”, then press 
.
“Quick Scan”: Channels are tuned according to the cable provider’s information within the broadcast signal. The recommended setting for “Frequency”, “Network ID” and “Symbol Rate” is “Auto” unless your cable provider has supplied actual values to use. “Quick Scan” is recommended for fast tuning when this is supported by your cable provider.
“Full Scan”: All available channels are tuned and stored. This procedure may take some time. This option is recommended when “Quick Scan” is not supported by your cable provider.
For further information about supported cable providers, refer to the support web site:
3 Press G/g/f to select “Start”, then press
.
The TV starts searching for channels. Do not press any buttons on the TV or remote.
~
Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”.
~
Do not remove the stand for any reason other than to wall- mount the TV or to attach the optional TV stand.
Guide