Getting Started
Installing the TV
Preventing the TV | Attaching the Support Belt |
from Toppling Over |
|
TV stand
stand
1Screw the support belt (supplied) to the TV stand with a wood screw (supplied).
2Attach the support belt to the stand with the securing screw (supplied) using a coin, etc.
3Adjust the length by pulling the support belt toward you while holding the stand.
Be sure to take measures to prevent the TV from toppling over and causing injury.
The supplied wood screw may not be used depending on the type of TV stand. In this case, or when the securing strength is not enough, use commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the TV stand. Consult your dealer about the types of screw.
Started Getting
15