When Installing on a Wall

Getting Started

 

 

 

 

 

This TV can be installed on a wall by using a wall-mount bracket (sold

Getting

 

separately). Be sure to use the specified Wall-Mount Bracket (see page 3).

 

Before mounting the TV on a wall, you must remove the Table-Top Stand

Started

then refer to the instruction guide “Installing the Wall-Mount Bracket” to

from the TV. Follow the steps below to remove the Table-Top Stand, and

 

prepare the installation and mount the TV on the wall.

 

Do not remove the Table-Top Stand for any reason other than to wall- mount the TV.

Follow the simple steps below to remove the Table-Top Stand:

1Disconnect all the cables from the TV.

2Place the TV, with its screen facing down, on a stable, soft cloth- covered work surface.

3Rotate the cable holder by 90 degrees, and pull it out.

4Remove the four screws and the Table-Top Stand from the TV.

For bracket installation, refer to the instruction guide “Installing the Wall- Mount Bracket” provided with the TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight. For product protection and safety reasons,

Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors.

Cable holder

Soft cloth

Table-Top stand

Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children.

17