Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.When it is flashing
TheFor example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.
2Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
When it is not flashing
1Check the items in the tables below.2If the problem still persists, have your TV serviced by qualified service personnel.
Condition | Explanation/Solution | ||
Picture |
|
| |
| No picture (screen is dark) and | • Check the aerial/cable connection. | |
| no sound | • Connect the TV to the mains, and press 1 on the top edge of the TV. | |
|
| • If the 1 (standby) indicator lights up in red, press TV "/1. | |
|
|
|
|
| No picture or no menu | • Press | / to display the connected equipment list, then select the |
| information from equipment | desired input. | |
| connected to the scart | • Check the connection between the optional equipment and the TV. | |
| connector |
|
|
|
|
| |
| Double images or ghosting | • Check the aerial/cable connection. | |
| (only in analogue mode) | • Check the aerial location and direction. | |
|
|
| |
| Only snow and noise appear | • Check if the aerial is broken or bent. | |
| on the screen (only in | • Check if the aerial has reached the end of its serviceable life (three to | |
| analogue mode) | five years in normal use, one to two years at the seaside). | |
|
|
| |
| Picture or sound noise when | • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture | |
| viewing a TV channel (only in | reception (page 47). | |
| analogue mode) |
|
|
|
|
| |
| Some tiny black points and/or | • The picture of a display unit is composed of pixels. Tiny black points | |
| bright points appear on the | and/or bright points (pixels) on the screen do not indicate a malfunction. | |
| screen |
|
|
| No colour on programmes | • Select “Reset” (page 39). |
|
| ||
| No colour or irregular colour | • Check the connection of the | / | COMPONENT IN sockets and | ||
| when viewing a signal from | check if each sockets are firmly seated in their respective sockets. | ||||
| the | / | COMPONENT |
|
|
|
| IN sockets |
|
|
|
| |
|
| ||||
| Picture freezes or contains | • Check signal level (page 50). If signal bar is red (no signal) or amber | ||||
| blocks on the screen | (low signal), check the aerial/cable connection. | ||||
Check the website below for updated information about compatible USB devices:
Sound
No sound, but good picture • Press 2 +/– or % (Mute).• Check if the “Speaker” is set to “TV Speaker” (page 45).• When using HDMI input with Super Audio CD or