Audio Settings
| Speaker | TV Speaker | Turns on and outputs the TV’s sound from the TV speakers. |
| Audio System | Turns off the TV speakers and outputs the TV’s sound from |
|
| external audio equipment connected to the audio output |
|
| sockets/jacks on the TV. |
|
|
|
| Audio Out | Variable | When using an external audio system, volume output from |
|
| audio out can be controlled using the TV’s remote. |
|
|
|
| Fixed | The audio output of the TV is fixed. Use your audio |
|
| receiver’s volume control to adjust the volume (and other |
|
| audio settings) through your audio system. |
|
|
|
| Headphone Settings | i Speaker Link | Switches the TV’s internal speakers on/off when you connect |
|
| headphones to the TV. |
|
|
|
| i Volume | Adjusts the volume of the headphones when “i Speaker |
|
| Link” is set to “Off.” |
|
|
|
| i Dual Sound | Sets the sound from the headphones for a bilingual broadcast. |
|
| |
| Optical Out | Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL) | |
| jack of the TV. Set to “Auto,” when connecting equipment compatible with Dolby | |
| Digital. Set to “PCM,” when connecting equipment not compatible with Dolby | |
| Digital. |
|
|
|
|
Set-up
| USB Auto Start | Automatically starts photo playback when the TV is turned on and a digital still |
| camera or other device storing photo files is connected to the USB port then turned |
| on. |
| ~ |
| • Playback does not start automatically if the TV is turned on after connecting the |
| digital still camera or other device to the USB port. |
|
|
| Quick Start | The TV turns on faster than usual by turning on the power using the remote. |
| However, power consumption in standby mode is approximately 16 watts higher |
| than usual. Up to 3 out of 5 time zones can be set. |
|
|