3Anchor the TV to the wall.

Use the hardware listed below (not supplied).

•Two M6 × 7-10 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the TV).

•Rope or chain (attach to one M6 anchor bolt).

•Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope through the wall-anchor, then attach to the other M6 anchor bolt).

 

Anchor bolts

Wall-mount

Rope or

chain

holes

 

Wall- anchor

~

•Measure 2 provides minimal protection against the TV toppling over. For further protection, follow all three measures recommended above.

•When using an electric screwdriver, set the torque setting to approximately 2 N·m {20 kgf·cm}.

46