4: Preventing the TV from toppling over

After all connections are completed, secure the TV.

2

3

1

1 Fasten the supplied support belt to the stand with the supplied screw.

2 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a screw driver or coin, etc.

3 While supporting the TV, tighten the supplied support belt to adjust the length.

5:Switching on the TV

1

2

1

2

Connect the TV to your mains socket (220-240V AC, 50Hz).

Press 1 on the TV (right side).

When you switch on the TV for the first time, the message confirming the TV start auto-tuning appears on the screen, then go to “6: Auto-tuning the TV” on page 13.

When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press TV +/1 on the remote to switch on the TV.

12