To connect | Do this |
|
DVD player with | Connect to the component sockets | |
component output | and the audio sockets | / 4. |
EThe component signal containing 576p signal format and audio signal are input from the DVD player.
Digital satellite | Connect to the HDMI IN 5 socket | ||||
receiver or DVD | if the equipment has a HDMI |
| |||
player F | socket. The digital video and audio | ||||
| signals are input from the digital | ||||
| satellite receiver. If the equipment | ||||
| has a DVI socket but not an HDMI | ||||
| socket, connect the DVI socket to | ||||
| the HDMI IN 5 socket through a | ||||
| DVI - HDMI adaptor interface (not | ||||
| supplied), and connect the |
| |||
| equipment’s audio out sockets to | ||||
| the audio in HDMI IN 5 sockets. | ||||
| The digital video and analogue |
| |||
| audio signals are input from the |
| |||
| equipment. |
|
| ||
|
|
|
|
| |
“PlayStation 2”, | Connect to the scart socket | / | |||
DVD player or |
| 1. When you connect the |
| ||
|
| ||||
decoder G | decoder, the scrambled signal from | ||||
| the TV tuner is output to the |
| |||
| decoder, then the unscrambled |
| |||
| signal is output from the decoder. | ||||
| In this case, it will be properly |
| |||
| unscrambled if you set “AV2 |
| |||
| Output” to “TV Analog” |
| |||
|
|
| |||
|
|
|
|
| |
DVD recorder or | Connect to the scart socket | / | |||
VCR that supports |
| 2. SmartLink is a direct link | |||
| |||||
SmartLink H | between the TV and a VCR/DVD | ||||
| recorder. For more information on | ||||
| SmartLink, refer to the instruction | ||||
| manual supplied with your VCR or | ||||
| DVD recorder. |
| |||
|
|
|
|
| |
VCR I | For details, see page 11. |
| |||
|
|
|
|
| |
Connect to the audio output |
| ||||
equipment J | sockets |
| to listen to the sound | ||
| |||||
| from the TV on |
|
equipment. To turn off the sound of the TV speakers, set “Speaker” to “Off” (page 26).
Programming the remote
This remote is preset to operate Sony TVs, most Sony DVDs, VCRs and AUX systems (DAV, DTT Receiver, Home Theatre, etc.).
To control VCRs and DVDs of other manufactures (and some other Sony VCR, DVD and AUX models), do the following procedure to programme the remote.
Note
Before you start, look up the
AUX/VIDEO TV
|
| V D |
| 1 |
| |
|
| T | VD |
|
| |
|
| C R | U |
|
| |
|
|
| A |
|
|
|
|
| V | X |
|
|
|
| DIGITAL | MODE | ANALOG |
|
| |
|
|
|
|
| ||
| 1 | 2 |
| 3 | 2 | Using |
| 4 | 5 |
| 6 | ||
|
|
| Optional | |||
| 7 | 8 |
| 9 |
| |
|
|
|
| |||
|
| 0 |
|
|
|
|
1 | Press and hold | for about six seconds | Equipment | |||
To programme VCR or DVD: |
|
until the green VCR and DVD lights flash.
To programme Sony AUX systems:
Press and hold for about six seconds until the green AUX light flashes.
2 While the relevant lights are flashing, press the number buttons to enter all
The green light is lit momentarily.
3 Turn on your equipment and check that the following main functions work.
N(playback), x (stop), m (rewind), M (fast forward) channel selection for both VCR and DVDs, MENU and M/m/</, buttons only for DVDs.
Continued
37