Viewing pictures from connected equipment
Switch on the connected equipment, then perform one of the following operation.
For equipment connected to the scart sockets using a
Start playback on the connected equipment.
The picture from the connected equipment appears on the screen.
For anIn analogue mode, press PROG
Press 
/
repeatedly until the correct input symbol (see below) appears on the screen.
1/
1, 
2/
2, 
3/
3: Audio/video or RGB input signal through the scart
socket 
/
1, 2 or 3. 
appears only if an RGB source has been connected.
4:
Component input signal through the Y, PB/CB, PR/CR
sockets 
/
4, and audio input signal through the
L/G/S/I, R/D/D/D sockets 
/
4.
5:
Digital audio/video signal is input through the HDMI IN 5 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket.
6/
6:
Video input signal through the video socket 
6, and audio input signal through the audio socket L/G/S/I
(MONO), R/D/D/D sockets 
6. 
appears only if
the equipment is connected to the S video socket
6
instead of the video socket 
6, and S video input
signal is input through the S video socket 
6.
Additional operations
To | Do this |
Return to the normal Press DIGITAL or ANALOG. TV operation
Access the Input | Press OK to access the Input signal |
signal index table | index table. (Then, only in |
| analogue mode, press ,.) To |
| select an input source, press M/m, |
| then press OK. |
|
|
Using the Menu
Navigating through menus
AUX/VIDEO TV
| V D | |
| T | VD |
| R | U |
C |
| A |
| X | |
V |
| |
DIGITAL MODE ANALOG
1 2 3
4 5 6
7 8 9
0
2,3,4
OK
4
MENU
PROG
1
1 Press MENU to display the menu.
2 Press M/m to select a menu icon.
3 Press M/m/</, to select an option.
4 Press M/m/</, to change/set the setting, then press OK.
To exit the menu, press MENU.
To return to the last display, press <.
Continued
Menu the Using
19