On Timer

Sets the timer to turn on the TV from standby mode.

“Day”: Selects the day on which you want to activate the On Timer.

“Time”: Sets the time to turn on the TV.

“Duration”: Selects the time period after which the TV automatically switches to standby mode again.

“Volume Set-up”: Sets the volume for when the timer turns on the TV.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal.

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

 

When “Picture Off” is selected, the picture is switched off and the

 

 

(Picture Off)

 

indicator on the TV (front) lights up in green. The sound remains unchanged.

 

 

 

 

 

 

 

 

 

 

 

 

Light Sensor

“On”: Automatically optimizes the picture settings according to the ambient light in

 

the room.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Off”: Turns off the “Light Sensor” feature.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Be sure not to put anything over the sensor, as its function may be affected. See page 14 for

 

further information on the sensor.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV2 Output

Sets a signal to be output through the socket labelled

/

 

 

2 on the rear of the

 

 

 

TV. If you connect a VCR or other recording equipment to the

 

 

 

 

/

 

2 socket,

 

 

 

 

 

 

 

you can then record from the equipment connected to other sockets of the TV.

 

“TV”: Outputs a broadcast.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“AV1”: Outputs signals from equipment connected to the

 

 

 

 

/

 

 

 

1 socket.

 

 

 

 

 

 

 

 

“AV6”: Outputs signals from equipment connected to the

 

 

 

 

 

/

 

 

6 socket.

 

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

 

 

/ 3, HDMI IN 4, HDMI IN 5 and PC

 

sockets).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quiet Power On

Sets the volume control at a low level when the TV is first turned on, gradually

 

increasing the sound to a preset level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker

Switches on/off the TV’s internal speakers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“On”: The TV speakers are turned on in order to listen to the TV’s sound through

 

TV’s speakers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Off”: The TV speakers are turned off in order to listen to the TV’s sound only

 

through your external audio equipment connected to the audio output sockets.

 

 

 

 

 

 

 

 

 

 

 

 

Audio Out

“Variable”: The audio output from your audio system can be controlled by the TV’s

 

remote.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume

 

control to adjust the volume (and other audio settings) through your audio system.

 

 

 

 

 

 

 

 

 

 

 

 

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”,

 

or “PAL60”) according to the input signal from the input source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Information

Displays your TV’s system information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Functions MENU Using

Continued

29 GB