Analogue Set-up menu (Analogue mode only)

You can change/set the analogue settings using the Analogue Set-up menu. To select options in “Settings”, refer to “Picture menu” (page 23).

1 Digit Direct

When “1 Digit Direct” is set to “On”, you can select an analogue channel using one preset number button (0 - 9) on the remote.

Note

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering two digits using the remote.

Auto Tuning

Tunes in all the available analogue channels.

Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 8). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).

Programme Sorting Changes the order in which the analogue channels are stored on the TV.

1Press F/f to select the channel you want to move to a new position, then press .

2Press F/f to select the new position for your channel, then press .

Programme Labels Assigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channel is selected. (Names for channels

are usually taken automatically from Analogue Text (if available).)

1Press F/f to select the channel you want to name, then press .

2Press F/f to select the desired letter or number (“_” for a blank space), then press g.

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct character.

To delete all the characters

Select “Reset”, then press .

3Repeat the procedure in step 2 until the name is complete.

4Select “OK”, then press .

32 GB