44
SETUP SETUP SETUPSETUP SetupSETUP
Notes on Adjusting the Convergence Manually
Allow the TV to wa rm up for about 30 minu tes before you adjust
the convergence.
For best results, stand about 3 to 5 feet back from the picture
when adjusting the convergence. Begin with the crosses in the
center area of the screen and, once those are adjusted, move to the
crosses on the edges of the screen.
You can make separate adjustments to each wide mode:
Full/Normal, Zoom, Wide Zoom, and Memory Stick/1080i high-
definition input. (These features share a common c onvergence
mode.) The cross pattern looks different in each of these, but the
adjustment procedure is the same. Press the WIDE MODE button on
the remote to toggle through the wide mode screens.
To optimize the conditions for convergence adjustment, in the
Video M enu, s et Mode to Pro or Movie and lower the Picture level
settings (see page92). You can reset the adjustments by pressing
the RESET button on the remote control.
AX1 PJ.book Page 44 Wednesday, April 30, 2003 2:13 PM