Condition | Explanation/Solution | |
No sound/Noisy sound |
| |
|
|
|
| Good picture, no sound | • Check the volume control. |
|
| • Press MUTING or VOL + so that “Muting” disappears from the screen |
|
| (see page 21). |
|
| • Disconnect your headphones. |
|
| • Set Speakers to TV Speakers in the Audio Options settings (see page 39). |
|
| If it is set to Audio System, sound is not output from the TV’s speakers |
|
| regardless of the TV’s volume control. |
|
| • When using HDMI input with Super Audio CD or |
|
| (Optical) may not provide an audio signal. |
|
|
|
| Audio noise | • Make sure that the antenna is connected using a |
|
| • Keep the antenna cable away from other connecting cords. |
|
| • To avoid TV interference, make sure to use an undamaged antenna cable. |
|
|
|
PC Input |
| |
|
|
|
| No Picture / No Signal | • Confirm the PC is correctly connected to the TV with either the PC IN (with an |
|
| |
|
| • Ensure the output signal from the PC is one of the formats listed on page 15. |
|
| • Turn the PC off. Confirm the PC connection and restart the PC. Plug and play |
|
| will |
|
|
|
| Poor Picture | • Adjust the resolution (see page 15). |
|
| • Adjust Pitch and Phase. |
|
|
|
General |
| |
|
|
|
| Wide Mode changes | • The current Wide Mode setting is automatically replaced with the 4:3 |
| automatically | Default setting when you change the channel or video input, if 4:3 Default in |
|
| the Screen settings is set to other than Off. If you want to lock in Wide Mode |
|
| selected with the WIDE button on the remote control, set 4:3 Default to Off in |
|
| the Screen settings (see page 35). |
|
| • Check Auto Wide in the Screen settings (see page 35). |
|
|
|
| Picture Mode setting turns | • The Store Display Mode might be set to On. This will be deactivated if you |
| to Vivid automatically | run the Auto Program (see page 39). |
“Store Display Mode :On” • The Store Display Mode is set to On. This will be deactivated if you run the
appears | Auto Program (see page 39). |
|
|
Suddenly the picture gets | • The picture gets smaller during the commercials, this is due to the method the |
smaller | provider broadcasts their contents. When HD content channels switch to SD |
| definition content (commercials), the picture may be small with a black border. |
|
|
“Black box” on screen | • You have selected a text option and no text is available (see page 40). To turn off |
| this feature, set CC Display to Off. If you were trying to select closed |
| captioning, select CC1 instead of |
Black bands appear at the edges of the screen
•Some wide screen programs are filmed in aspect ratios that are greater than 16:9 (this is especially common with theatrical releases). Your TV will show these programs with black bands at the top and bottom of the screen. For more details, check the documentation that came with your DVD (or contact your program provider).
•Programs in 4:3 aspect ratio will have bands on left and right sides of the screen.
Certain programs on DVD or other digital sources display a loss of detail, especially during
•This is due to the digital compression of the source content used by certain digital broadcasts and DVDs which may cause your TV’s screen to display less detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear on your screen. These signal compressions are more visible and are dependent on the clarity and resolution of the television.
| When playing a video game, | • Set the Game/Text Mode to On (see page 38). |
| there is delay between the remote |
|
| control and the actual video |
|
|
|
|
| Remote control does not | • Check the polarity of the batteries or replace the batteries. |
| operate | • Point the remote control at the remote control sensor located at the front of the TV. |
|
| • Fluorescent lamps can interfere with your remote control operation; try turning |
|
| off the fluorescent lamps. |
|
| • Keep the remote control sensor area clear from obstacles. |
|
|
|
48