Remote Control

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony Equipment

Programmable Code Number

Beta, Ed Beta VCRs

303

 

 

8 mm VCR

302

 

 

VHS VCR

301

 

 

DVD player

751

 

 

If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control.

The equipment must have infrared (IR) remote capability in order to be used with the remote control.

1Turn to the list of “Manufacturer’s Codes” on page 55, and find the three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first.)

2Press FUNCTION repeatedly until the DVD/VCR or SAT/CABLE indicator lights up.

3While the desired indicator is lit, enter the three-digit manufacturer’s code number.

4Press ENTER.

You must do step 4 within 10 seconds of step 3, or you must redo steps 3 through 4.

5To check if the code number works, aim the TV’s remote control at the equipment and press POWER that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.

Notes

sIf more than one code number is listed, try entering them one by one until you come to the correct code for your equipment.

sIf you enter a new code number, the code number you previously entered at that setting is erased.

sIn some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment’s own remote control unit.

sWhenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset.

54