Optional Connections

Smartlink

Smartlink is a direct link between the set and a VCR.

For Smartlink you need:

• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.

Megalogic is a trademark of Grundig Corporation.

EasyLink is a trademark of Philips Corporation.

•A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector :2/q2 (SMARTLINK) on the rear of the set.

The features of Smartlink are:

•Tuning information such as the channel overview are downloaded from the set to the VCR.

•Direct recording: While watching TV you need to press just one button on the VCR to record this programme.

•Automatically switching on: With the set in standby mode, pressing the “Play z” button on your VCR automatically switches the TV on.

If you have connected a decoder to a VCR which supports Smartlink feature, select

the menu “Further Programme Preset” in the (Manual Set Up) menu and select DECODER AV2 to each coded channel. For more details, please refer to the section "Using the Further Programme Preset function" of this instruction manual.

For more information on Smartlink, please refer to the Instruction Manual of your VCR.

Rear

VCR

Decoder

Remote Control of other Sony Equipment

Using the buttons underneath the cover of the remote control you can control other Sony equipment.

1

Open the cover of the Remote Control.

2

Set the selector VTR 1234 DVD according to the equipment you want to control:

 

VTR 1

Beta VCR

 

VTR 2

8 mm VCR

 

VTR 3

VHS VCR

 

VTR 4

Digital Video (DCR-VX 1000/9000 E, VHR-1000)

 

DVD

Digital Video Disk

3 Use the buttons underneath the cover on the remote control to operate the equipment.

• If your equipment has a COMMAND MODE selector, set this

selector to the same position as the VTR 1234 DVD selector on this set Remote Control.

• If the equipment does not have a certain function, the corresponding button on the remote control will not work.

VIDEO TV

VTR1234 DVD

CH

VTR1234 DVD

CH

30 Optional Connections