• Unplug the AC power cord during lightning storm.

• Do not keep the LCD projection TV plugged in if

you are not going to use it for several days. Even if

your LCD projection TV is turned off, it is still connected to AC power when plugged into an

outlet.

• Do not pull the power cord to disconnect the LCD projection TV. Pull it out by the plug.

•Do not plug in too many appliances to the same power jack. Do not damage the power cord.

•Do not place any objects on

the LCD projection TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

•To prevent fire, keep

inflammable objects or naked lights (e.g. candles) away from the LCD projection TV.

•If a snapping or popping sound from a TV set is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.

•Give careful consideration to the environment when disposing of batteries.

Carry the LCD projection TV in the specified manner

If you carry the LCD projection TV in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused. Be sure to follow the instructions mentioned below.

•Carry the LCD projection TV with the specified number of persons (see

page 12).

•Do not carry the LCD projection TV holding the speaker grill.

•Hold the LCD projection TV tightly when carrying it.

•Before carrying the LCD projection TV, disconnect any accessories or cables.

•Do not carry the LCD projection TV

holding the screen edges.

Caution

Do not use the LCD projection TV at altitudes higher than 4000 m, as doing so might cause malfunctions.

Cleaning

Clean the rear cover area of the LCD projection TV regularly. Dust in rear cover area may cause a problem with the cooling system of the LCD projection TV set.

•To remove hard contamination, use a cloth moistened with a solution of mild detergent and water. Do not use a spray cleaning solution directly to the TV. It should only be used to moisten the cleaning cloth.

•Clean the cabinet of the LCD

projection TV with a dry soft

cloth. To remove dust from the screen, wipe it gently with a soft cloth. Stubborn stains may

be removed with a cloth slightly dampened with a

solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning. If picture brightness decreases over time, it may be necessary to clean the inside of the LCD projection TV. Consult qualified service personnel.

•Unplug the AC power cord when cleaning this unit. If not, it may result in electric shock.

•Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ball point pen or a screw driver. This type of contact may result in a scratched screen.

About the LCD projection TV

•Although the LCD projection TV is made with high- precision technology, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the screen. This is a structural property of the panel and is not a malfunction.

•When High contrast non-moving images such as station logos and channel numbers are displayed for a long period of time, there may be some image retention on the screen. This is only a temporary condition. Turning off the power for a while or letting the TV run on another channel will eliminate the retained image.

About the AC power cord

The shape of AC plug varies, depending on the regions.

6 GB