Option | Description |
|
|
Sound Offset | Changes the input sound level of the equipment connected to the |
| TV. |
| Press M/m to adjust the input sound level between |
| +9, then press OK. |
|
|
Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to skip (page 29).
1
2
Press OK to select “Manual Programme Preset”.
Press M/m to select one of the following options, then press OK.
Option | Description | ||
|
| ||
Programme | Presets programme channels manually. | ||
| 1 | Press M/m to select “Programme”, then press OK. | |
System | |||
| 2 | Press M/m to select the programme number you want | |
Channel | |||
| to manually tune (if tuning a VCR, select channel 0), | ||
|
| ||
|
| then press <. | |
| 3 | Press M/m to select “System”, then press OK. | |
|
| Note | |
|
| Depending on the country/region selected for “Country” | |
|
| (page 26), this option may not be available. | |
| 4 | Press M/m to select one of the following TV broadcast | |
|
| systems, then press <. | |
|
| B/G: For western European countries/regions | |
|
| D/K: For eastern European countries/regions | |
|
| I: For the United Kingdom | |
|
| L: For France | |
| 5 | Press M/m to select “Channel”, then press OK. | |
| 6 | Press M/m to select “S” (for cable channels) or “C” (for | |
|
| terrestrial channels), then press ,. | |
| 7 | Tune the channels as follows: | |
|
| If you do not know the channel number (frequency) | |
|
| Press M/m to search for the next available channel. When a | |
|
| channel has been found, the search will stop. To continue | |
|
| searching, press M/m. | |
|
| If you know the channel number (frequency) | |
|
| Press the number buttons to enter the channel number of the | |
|
| broadcast you want or your VCR channel number. | |
| 8 | Press OK twice to store. | |
| Repeat the procedure above to preset other channels manually. | ||
|
| ||
Label | Assigns a name of your choice, up to five letters or numbers, to the | ||
| selected channel. This name will be displayed briefly on the screen | ||
| when the channel is selected. | ||
| 1 | Follow steps 3 to 5 of “Programme Labels” (page 27). | |
| 2 | Press OK. | |
|
|
| |
28