1
2
3
4
Connect your aerial with the coaxial cable.
If connecting to an aerial only (A)
Connect your aerial to the 
socket on the rear of the TV, then go to step 3.
If connecting to a VCR with an aerial (B)
Connect your aerial to the input socket on your VCR.
Connect your VCR.
1Connect the output socket on your VCR to the
socket on the rear of the TV with the RF lead.
2Connect the scart socket on your VCR to the
/
2 scart socket on the rear of the TV with a scart lead.
Connect the supplied mains lead to the AC IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until all connections are complete.
Bundle the cable.
5: Switching on the TV
2
1
SONY
1 Connect the TV to your mains socket (220- 240V AC, 50Hz).
2 Press 1 on the TV (Top side).
When you switch on the TV for the first time, the language menu appears on the screen, then go to “6: Selecting the language and country/region.
When the TV is in standby mode (the 1 (standby) indicator on the front of the TV is red), press TV +/1 on the remote to switch on the TV.
4:Preventing the TV from toppling over
After all connections are completed, secure the TV.
1 Fasten the supplied support belt to the stand with a screw.
2 While supporting the TV, tighten the supplied support belt to adjust the length.
3 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a screw driver or coin, etc.
3
2
1