Sony KLV 23HR1 Bundling cords and cables, Adjusting the viewing angle of the, Carrying the TV

Bundling cords and cables

This TV allows you to bundle the cords and cables inside of the stand.

To the rear of the TV

Cable cover

Concave portion

To the AC power adaptor and optional video equipment

To remove the cable cover, put your fingers in the concave portion on the top of the cover, then pull the cover downwards.

To attach the cable cover, fit the four detents on the cover into the corresponding holes on the stand, then push the cover.

Tip

If you cannot bundle all of the cords and cables inside the stand, leave them hanging down outside the stand.

Adjusting the viewing angle of the

TV

This TV can be adjusted within the angles shown in the diagram below.

15°

3°

Note

Be sure to hold the stand of the TV to prevent an upset of the TV when you adjust the viewing angle of the TV.

Installing and Connecting the TV

Carrying the TV

When carrying the TV, hold it as shown in the diagram below. Do not hold only the rear cover. As the rear cover comes off easily, doing so may cause you to drop the TV, resulting in damage to the TV or injury.

11