Introducing the TV
Installing the TV
Preventing the TV | Attaching the Support Belt |
from Toppling Over |
|
TV the Introducing
1 Screw the support belt (supplied) to the TV stand with a wood screw (supplied).
2 Attach the support belt to the stand, and screw the belt with a securing screw (supplied) using a coin, etc.
3 Adjust the length by pulling the support belt towards you while holding the TV stand.
Be sure to take measures to prevent the TV from toppling over and causing injury.
The supplied wood screw may not be used depending on the type of TV stand. In this case, or when the securing strength is not enough, prepare commercial screws to fit to the TV stand. Use commercial screws of 3 to 4 mm diameter. Consult your dealer about the types of screw.
When Mounting on a Wall
Be sure to use the following optional
See the Instruction Guide supplied with the
11