Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the Dsocket using a scart lead. If you do not have a scart lead, use the “Manual Programme Preset” section on page 16 to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to your VCR instruction manual to get the VCR test signal.

If your video supports SmartLink please refer to the "SmartLink" section of this instruction manual on page 22.

If you have connected a decoder to the Scart 3/ S 3 D or through a VCR connected to this Scart:

Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option, select “On” (by using or ). Repeat this option for each scrambled signal (see page 16).

**This option is only available depending on the country you have selected in the “Language/Country” menu (see page 14).

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets Aif you wish to amplify the audio output from projection TV. Next , using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “Off” (see page 12).

Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the “Sound Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:

Place the speakers of your equipment in front of your listening position and beside the projection TV set but keeping a distance of 50 cm between each speaker and the projection TV set.

Then by using the menu system, select the menu “Sound Adjustment”. Next select “Dolby V” on the “Effect” option (see page 12).

Using Optional Equipment

Left

Right

Hi-Fi

Hi-Fi

speaker

speaker

~50°

GB

Your sitting position

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the connector to which you have connected the device.

e. g. : Your VCR is connected to the connector with the symbol :1/ 1. Press the button on the remote control repeatedly until you see the symbol 1 on the screen.

1 Connect your equipment to the designated projection TV socket, as it is indicated on the previous

2

page.

 

 

 

Switch on the connected equipment.

 

 

3

To watch the picture of the connected equipment, press the

 

button repeatedly until the

 

 

correct input symbol appears on the screen.

 

 

 

Symbol Input Signals

 

 

 

 

 

1

• Audio / video input signal through the Scart connector B

 

 

 

1

• RGB input signal through the Scart connector B. This symbol appears only if an RGB

 

 

 

 

source has been connected.

 

 

2 • Audio / video input signal through the Scart connector C.

2 • RGB input signal through the Scart connector C. This symbol appears only if an RGB source has been connected.

3 • Audio/video input signal through the Scart connector D.

S 3 • S Video Input signal through the Scart connector D. This symbol appears only if an S Video source has been connected.

4 • Video input signal through the phono socket Fand Audio input signal through G.

S4 • S Video Input signal through the front S Video input jack Eand Audio signal through G. This symbol appears only if an S Video source has been connected.

4 Press

button on the remote control to return to the normal TV picture.

 

 

 

 

For mono equipment

 

 

 

 

Connect the phono plug to the L/G/S/I socket on the side of the TV and select

 

4 or

 

S 4 input

 

 

signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen (see page 12).

Additional Information 21