28
SETUP SETUP SETUPSETUP SetupSETUP
Satellite Receiver To connect a satellite receiver
1Connect the satellite antenna cable to the s atellite receiver’s
satellite input jack.
2Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
3Connect your cable or antenna to the satellite receiver’s
VHF/UHF input jack.
4Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the TV’s VHF/UHF jac k.
5Run Auto Program, as described in “Setting Up the Channel List”
on page39.
Using
S VIDEO jacks?
See page23.
Satellite
antenna cable
A/V cable
CATV cable
TV
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Coaxial
cable
AX1X.book Page 28 W ednesday, June 30, 2004 9:21 AM