Additional Information
Troubleshooting
If you have any problem while viewing your TV, please check the following troubleshooting guide. If the problem persists, contact your Sony dealer.
Symptom | Possible cause | Solutions | Page | |
Snowy picture | • The connection is | • Check the antenna cable and | 5 | |
| loose or the cable is | connection on the projection TV, VCR |
| |
| damaged. | and at the wall. |
| |
| • Channel presetting | • Press the PRESET button to display | 44 | |
| is inappropriate or | the “MANUAL PROGRAM” menu |
| |
Noisy sound | incomplete. | and preset the channel again. |
| |
• The antenna type is | • Check the antenna type (VHF/UHF). | – | ||
| ||||
| inappropriate. | Contact a Sony dealer for advice. |
| |
| • The antenna | • Adjust the antenna direction. Contact | – | |
| direction needs | a Sony dealer for advice. |
| |
| adjustment. |
|
| |
| • Signal transmission | • Try using a booster. | – | |
| is low. |
|
| |
Distorted picture | • Broadcast signals | • Press the PRESET button to display | 45 | |
| are too strong. | the “MANUAL PROGRAM” menu. |
| |
|
| Then, select “ SENS: LOW”. |
| |
|
| • Turn off or disconnect the booster if it | – | |
|
| is in use. |
| |
Noisy sound |
|
|
|
Good picture | • The TV system | • If the sound of all the channels are noisy, | 43 |
| setting is | display the “CH PRESET” menu and |
|
| inappropriate. | select “AUTO PROGRAM” to preset the |
|
|
| channels again. |
|
|
| • If the sound of some channels is noisy, | 44 |
Noisy sound |
| select the channel, then display the |
|
| “CH PRESET” menu and select the |
| |
|
|
| |
|
| appropriate TV system (“TV SYS”). |
|
No picture | • The power cord, | • Check the power cord, antenna and | 5 |
| antenna or VCR is | the VCR connections. |
|
| not connected. |
|
|
| • The projection TV is | • Press I/1 on the remote. | 13 |
| not turned on. | • Press ! on the TV to turn off the | 14 |
No sound |
| ||
| projection TV for about five seconds, |
| |
|
| then turn it on again. |
|
46Additional Information