Sony KP 46WT500 manual Programming the Remote Control

Press ENTER.

Enter the three-digit manufacturer’s code number using the

Close the panel and press SAT/CABLE (FUNCTON).

Open the panel of the remote control.

01COV.book Page 68 Tuesday, July 30, 2002 3:46 PM

Other Information

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony	Switch Position	Programmable
Equipment	on Remote Control	Code Number
Beta, ED Beta VCRs	AV1	303
8 mm VCR	AV2	302
VHS VCR	AV3	301
DVD Player	DVD	751

If you have video equipment other than Sony brand that you want to control with the projection TV’s remote control, use the following procedures to program the remote control.

✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.

From the “Manufacturer’s Codes” listed on page 70, select the three-digit code number for the manufacturer’s code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure.

To program a cable box or a satellite receiver

1

2 Press CODE SET inside the panel.

3

40-9buttons.

5

6 To check if the code number works, aim the projection TV’s remote control at the component and press the green POWER button that corresponds with that component. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

68

Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]

[4-088-847-12]