Setup

SETUP

Satellite Receiver

and VCR

Using

S VIDEO jacks?

See page 23.

To connect a satellite receiver and VCR

1Connect the CATV cable to the single (input) jack of the splitter.

2Use a coaxial cable to connect one of the splitter’s two output jacks to the TV’s VHF/UHF jack.

3Use a coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.

4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.

5Use a coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.

6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.

7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.

8Run Auto Program, as described in “Setting Up the Channel List” on page 39.

Notes on Using This Connection

To Do This ...

Do This ...

Watch the satellite receiver

Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 3 in

 

the illustration).

 

 

Watch the VCR

Press TV/VIDEO repeatedly to select VCR input (VIDEO 1 in the illustration).

 

 

Set up the TV remote control

If you have a non-Sony VCR or satellite receiver, you must program the

to operate the satellite

remote control. See “Programming the Remote Control” on pages 46-47.

receiver or VCR

 

 

 

Activate the TV remote

For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, press

control to operate the satellite

DVD/VCR FUNCTION.

receiver or VCR

 

 

 

Control satellite receiver and

See “Operating a Satellite Receiver” on page 48 and “Operating a VCR” on

VCR functions with the TV

page 48.

remote control

 

 

 

Label video inputs to easily

See the instructions for setting up Video Labels on pages 72-73.

identify equipment connected

 

to the TV

 

 

 

30