Sony KP 51HW40, KP 57HW40 manual 15

	Installing and Connecting the Projection TV
Connection	Description
1 AUX	Allows you to view local and cable channels if your cable
	provider does not feature local channels. You can switch
	between local and cable channels easily by pressing ANT
	on the remote control. Devices connected to the AUX
	input cannot be viewed in Twin View.

2TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your projection TV to switch between scrambled channels (through a cable box) and normal cable channels (CATV). Use this jack instead of a splitter to get better picture quality when switching between scrambled and unscrambled cable channels.

3 VHF/UHF	Connects to your VHF/UHF antenna or cable.
4 S VIDEO	Connects to the S VIDEO OUT jack of your VCR or other
(Rear and front)	S VIDEO-equipped video component. Provides better
	picture quality than the VHF/UHF jacks or the Video IN
	jack.
5 VIDEO	Connects to the audio and video OUT jacks on your VCR
(L/R)/AUDIO	or other video component. A fourth video input (VIDEO
(Rear and front)	2) is located on the front panel of the projection TV.
6 Y/PB/PR	Connects to your DVD player’s or Digital Set-top box’s
(L/R)/AUDIO	component video (Y, PB, PR) and audio (L/R) jacks.
7 TV OUT	Connects to an AV receiver for greater control of all audio
	and video equipment (see page 30). For detailed
	information about connection, refer to the operating
	manual supplied with the AV receiver.
8 AUDIO OUT	Connects to the left and right audio inputs of your audio or
(VAR/FIX)	video component.
L (MONO)/R

9CONTROL S To control other Sony equipment with the projection TV's

IN/OUT	remote control, connect the CONTROL S IN jack of the
	equipment to the CONTROL S OUT jack on the
	projection TV with the CONTROL S cable.
	To control the projection TV with a remote control for
	another Sony product, connect the CONTROL S OUT
	jack of the equipment to the CONTROL S IN jack on the
	projection TV with the CONTROL S cable.

TV Projection the Connecting and Installing

15