Installing and Connecting the Projection TV

Connecting a Satellite Receiver

Disconnect all power sources before making any connections.

1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.

3 Connect a coaxial cable from your cable or antenna to the projection TV’s VHF/UHF jack.

✍If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

Rear of projection TV

Coaxial cable

VIDEO (yellow)

 

AUDIO-L (white)

 

AUDIO-R (red)

Satellite receiver

S

 

VIDEO

Satellite

 

antenna

 

cable

VMC-810S/820S (not supplied)

YC-15V/30V (not supplied)

TV Projection the Connecting and Installing

23