Operating Instructions

There is no

￿ Be sure your window picture is set to a video source/

window picture

channel that has a program airing.

or it is just

￿ You may be tuned to a video input with nothing

static

connected to it. Try cycling through your video inputs

 

 

using the yellow PIP TV/VIDEO button with the red

 

dot (page 18).

 

 

 

￿ PIP is not set to receive a signal from the AUX input. If

 

you have connected a VCR, DVD or Satellite Receiver

 

to the AUX input on the TV, it will not show in the

 

small window picture.

 

I get the same

￿ Both may be set to the same channel. Try changing

program in the

channels in either the main picture or the window

window picture

picture (pages 18-19).

 

as in the main

￿ Your TV may be set up to select all your channels

picture

through a cable box. The cable box will only

 

 

unscramble one signal at a time, so you cannot use the

 

PIP feature. If possible, run a direct cable to the VHF/

 

UHF jack on your TV. This will only work if your cable

 

system provides an unscrambled signal (page 5).

You lost your

￿ You can use the front Audio/Video panel controls to

remote control

access the menu. Press

to open the menu. Use the

 

or

buttons on the front Audio/Video panel

 

instead of the F or F buttons on the remote control.

 

Use the

button on the front Audio/Video panel

 

instead of the G, g, and

buttons on the remote

 

control. Press

again when the setting or

 

adjustment is complete. Contact your nearest Sony

 

dealer to order a replacement.

If, after reading these Operating Instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only).

42